Ash catch stand
Overall assembled size:
15.76" Dia x 12.5" H (40 cm Dia x 31.7 cm H)
Burn chamber size:
12" W x 6.25" D (30.48 cm W x 15.875 cm D)
Net weight: 11.4 lb (5.2 kg)
WARNING: Outdoor use only. Do not use this unit on or near combustible surfaces or structures such as wood decks, dry leaves, or vinyl or wood siding. Use only on hard, level surfaces. Do not use on asphalt, or directly on a wooden or composite wood deck. May cause discoloration to a concrete surface. See the owner’s manual for important safety information.
CAUTION: This fire pit should not be left outside uncovered when not in use. Store your fire pit in a dry location out of the weather to ensure continued use. Exposure to weather, heavy use and UV rays may cause this product to developed a rusted patina.
WARNING: This fire pit is constructed of steel which is susceptible to rust when exposed to outdoor conditions and fire. The unique design of this fire pit can generate heat in the burn chamber that can exceed 1,200 °F (650 °C). While we paint our fire pits with high temperature heat resistant paint, there are no commercially available paints suitable to meet these extremes. With use and time, these fire pits will show signs of rust. This will not impact the performance of the fire pit. The paint can be touched up with high-temperature paint, which is used on BBQ grills and other high heat appliances and can be found at most hardware stores.
WARNING: The bottom for the fire grate in this fire pit is stitch welded into place to allow the fire grate to flex, which is required due to the high temperatures generated in the burn chamber. The flex can cause the fire grate to look wavy. This is normal and will not effect the performance of the fire pit.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov